The all-milled telescopic stock of the skeletal type "PT-3" with a rubber back and rubber cheek pad is designed for installation and operation on AK series AK-103, AK-104, AK-105, AK-74M, AK-74C, AKS-74U, Vityaz SN .

Comes with 5.5mm adapter.

The telescopic stock "PT-3" is installed on a regular place of AK stocks folding in the side.

It has a length adjustment mechanism and a cheek adjustable in height.
Allows you to make adjustments based on tasks and individual physique of shooter.

Operational Benefits:

• no modification of the weapon is required during installation
• the presence of an adjustable cheek and an adjustable back
• the telescopic mechanism has a wide range of length adjustments
• the original mechanism allows you to fold and fix the stock along the receiver of the weapon, with any established adjustments (the position of the telescopic mechanism and the height of the cheek)
• when folding, there is no need to remove the rail above the receiver "B-13" located on the side rail (dovetail) of the weapon receiver
• in the lower position of the cheeks allows you to work with a mechanical sight

Material : D16T alloy coated in black color.

Weight: 550 ± 10 (in the kit assembly: wide rubber cover for back of the stock and two slingmounts)

Overall dimensions: (210/260/110/140x43) ± 5 мм

Operating temperature range: from -50 ° С to + 50 ° С


In the kit:

• "PT-3" Stock (1 pc)
• Allen key (1 pc)
• Operation manual (1 pc)

To install the telescopic stock " PT-3" (hereinafter referred to as PT-3) on a weapon it is necessary:

1. PT-3 is installed instead of the standard stock of AK and carbines, created on the basis of AK.

2. Knock the axis out of the loop of the standard folding mechanism and remove the standard stock of weapons.

3. Install the PT-3 and the lock plate in the receiver, then drive the axis of the loop of the standard mechanism and then tighten the lock bar by screwing in the screw.

4. To fold the PT-3 to the left along the receiver, the standard button of the folding mechanism is used. In the folded position, the PT-3 is held with the lock button to lock the stock in the folded position.

5. To unfold the PT-3 and bring it into working position, it is necessary to press the lock button to fix the stock in the folded position and spread the butt. Fixing the PT-3 in the unfolded position is carried out using the lock of the standard folding mechanism.

6. To adjust the length of the stock, unscrew the screw for the final selection of backlash completely and press the adjustment key of the telescopic mechanism to pull the stock to obtain the desired length. After that, release the adjustment button for the telescopic mechanism and tighten the screw of the final selection of backlash by hand.

7. To select the height of the cheek, loosen the screw securing the cheek at the selected height and select the desired height. Then tighten the screw securing the cheek at the selected height by hand.

Moving parts of the telescopic stock length adjustment mechanism must be cleaned during maintenance of the weapon.